Our setup is built around QA1 Coilovers. THEY ARE NOT INCLUDED, AND THE PART NUMBERS ARE PROVIDED BELOW. SummitRacing.com has a good stock of these, and ship fast.
QA1 Aluma Matic Coilover Shocks ALN3855P
QA1 High-Travel 7 Inch Coilover Spring 7HT650
These part numbers are recommended, but chose what ever spec you need for your setup.
Our setup is built around QA1 Coilovers. THEY ARE NOT INCLUDED, AND THE PART NUMBERS ARE PROVIDED BELOW. SummitRacing.com has a good stock of these, and ship fast.
Everything is pre-welded onto the base plate. You cut off your factory spring and upper control arm perch, and weld it in.
This kit includes the updated driver side upper arm that allows you to use the factory steering shaft. No more sketchy steering knuckles. Factory steering shaft will work.
This kit contains:
Pair of Upper Tubular Control Arms (left and right)
Pair of Lower Tubular Control Arms
Pair of the upper frame plate assemblies containing new camber adjustable control arm tabs, coil over mounts.
Upper Balljoints
Lower Balljoints
Lower Control Arm Cross Shafts (bolts to factory location using factory U-bolts)
Grade 8 hardware
*Drop spindles are required and need to be re-tapered to accept these ball joints. You can use a 10 degree balljoint reamer to quickly do it yourself. DO NOT OVER TAPER YOUR SPINDLE. TAKE YOUR TIME, DO A SMALL AMOUNT AND TEST FIT OFTEN. Ship your Drop or Stock Spindles to Chassis Fab to be re-tapered for free, you only have to pay for shipping to and from Chassis Fab. Typically 6-8 week build time.
For off-road and show use only.
All kits are built to order, and no refunds can be issued after a order is placed.
SHIPS RAW STEEL